For VW Group vehicles with MIB3 / MOI3 infotainment, the VCRN is usually read from the 5F – Information Electronics module.

Using the infotainment system:

• Hold the MENU button for 3 seconds
• Select Function enabling codes
• Choose Installed codes
• Select any valid code
• Note the VCRN

Using ODIS:

• Open 5F – Information Electronics
• Check Measured values / Live data
• Locate Individualization characteristic

Using OBDeleven:

• Open Control Units
• Select 5F – Information Electronics
• Go to Live Data
• Locate Individualization characteristic

Using VCDS:

• Connect to the vehicle and open 5F – Information Electronics
• Go to Advanced Measuring Values / Measuring Values
• Search for Individualization characteristic
• The value shown here is the one commonly used as the VCRN

For us to carry out the remote activation session, you will need the following:

1. A USB-C drive with at least 32GB of storage.
2. A Windows or Mac computer.
3. Up to 90 minutes of your time.

Get in touch with us today! Click the WhatsApp button in the bottom right to start chatting with us to confirm compatibility.

Due to the nature of this service, we will perform a one-time lifetime activation on your headunit and therefore it is non-refundable.

Disclaimer

By purchasing this service, I consent to remote setup via software connection and acknowledge that this starts the service and waives my 14‑day cancellation right under the Consumer Contracts Regulations 2013. I understand refunds are only available if the service is faulty or not performed with reasonable care and skill.