As in-car technology evolves, keeping your vehicle's systems updated is crucial, especially components like the USB port that supports Apple CarPlay and Android Auto. If you’re experiencing connectivity issues with Apple CarPlay, it might be time to replace your USB port. Early 2015 and 2016 Volkswagen and SEAT vehicles introduced the MIB 2nd generation system, which supported Apple CarPlay. However, not all vehicles from this period were equipped with compatible USB ports due to the staggered introduction of Apple CarPlay in September 2015 and its wider adoption in 2016. Consequently, some vehicles from this era might require an updated USB port to fully utilise Apple CarPlay.
But how do you determine whether a replacement is necessary? This guide will help you diagnose the need for a new USB port and ensure that your car remains equipped with the latest tech.
1. Your Vehicle Has One Of These Installed SW Train Versions
If your Volkswagen has one of these Installed SW Train Versions, it may be affected (where XX means any digit):
- MST2_EU_VW_PQ_P02XXT
- MST2_EU_VW_ZR_P02XXT
- MST2_EU_SE_ZR_P02XXT
- MST2_EU_SE_PQ_P02XXT
In some rare cases if you have a single USB port and your version is:
- MST2_EU_SE_ZR_P03XXT - this will need replacing as well.
To confirm replacement, physically remove your USB port and look for a green connector in the next step.
2. Check Your USB Port To See If It's Green
Grab yourself a thin tool to pry out the USB port from your vehicle. A knife or thin screwdriver should do the job. Remove the USB port slowly (while the cable is still connected). If it looks like this with a purple/pink connector behind then it needs replacement.
Part number: 5G0 035 222 F (Android Auto only).
The replacement port looks like this with a green connector instead:
Part number: 5G0 035 222 E (Apple CarPlay and Android Auto)
If you need a new USB port, head on over to our product page here.
For your reference, here's a YouTube tutorial demonstrating replacement of the port.
Comment (7)
I have a mk7 golf with one so slot in the glove box my sw is mstd_eu_vw_p3163 can you help thanks
There is bo space to use a tool and the port is made of hard plastic, it doesn’t bend.
Wouldn’t it be easier to remove the 12v socket and then push the USB port from the inside?
I have a 2017 seat Leon duel SD slot system and my SW train ends in 0359T, is this compatible for Android auto and apple carplay?
Hi,
Seen your advert on the internet regarding AppleCar Play.
I have a 2017 VW Passat.
I have checked the USB connector and it’s green, I have 2 SD Card slots in the glove box.
I have checked the menu screen after 3 seconds.
Installed SW train version
MST2_EU_VW__P9122D
Installed_EU_MU version
0842
Software version
H29.204.28.3_STD2 Nav_EU
Will your product definitely work on my car.
Regards,
Barry
Hi Louis, this port is only manufactured in its current form, i.e. USB-A only.